当前：首页 > 产品中心 > 6055美国 Deep-Well Baths-福禄克FLUKE

6055美国 Deep-Well Baths-福禄克FLUKE

品牌/型号：福禄克FLUKE（6055）库号：H1012446

￥电联

保障：含运含税正品保障质保天

在线联系

福禄克FLUKE

型号:6055

美国 Deep-Well Baths

Extra-deep wells for thermometry work requiring extra tank depth and ultimate stability

Constant liquid levels through concentric-tube design
Special design for sighting LIG thermometers
Depth up to 60 cm (24 in)
Optional interface packages control all settings

The models 6054 and 6055 have extra-deep wells for use with liquid-in-glass thermometers, SPRT calibrations, or other thermometry work requiring extra tank depth. They were originally designed for NIST.

Well depths vary from 17 to 24 inches to eliminate stem conduction effects in probes that require more than 12 inches of immersion. Originally developed for a national standards lab, these baths are optimized for the visual calibration of liquid-in-glass thermometers.

The Model 6055, operating up to 550 °C, uses molten salts with a pumping system for maintaining the necessary consistent fluid level required for liquid-in-glass thermometer calibrations. A viewing channel is built into the top cover for a clear visual path to your glass thermometers.

The 6055 also has an optional thermometer carousel for holding several glass thermometers in the correct calibration position without exposing them to the hot salts in the bath. The Model 2018 Carousel is completely constructed of stainless steel and has an elevated handle for rotating your thermometers to the viewing position.

These deep-well baths are built to the same performance standards as all Fluke Calibration baths, which means you can’t find another bath that has better stability or uniformity.

Specifications
Model	6054	6055
Range	50 °C to 300 °C	200 °C to 550 °C
Stability	±0.003 °C at 100 °C (oil 5012) ±0.005 °C at 300 °C (oil 5017)	±0.003 °C at 200 °C (salt) ±0.01 °C at 550 °C (salt)
Uniformity	±0.007 °C at 100 °C (oil 5012) ±0.015 °C at 300 °C (oil 5017)	±0.005 °C at 200 °C (salt) ±0.010 °C at 550 °C (salt)
Temperature Setting	Digital display with push-button data entry
Set-Point Resolution	0.01 °C, high res. 0.00018 °C
Display Temperature Resolution	0.01 °C
Digital Setting Accuracy	±1 °C
Digital Setting Repeatability	±0.01 °C
Heaters	250 to 1000 W	225 to 1800 W
Working Area	196 mm dia. (7.7 in)	107 mm dia. (4.2 in)
Depth	610 mm deep (24 in), 196 mm dia. (7.7 in), removable SST lid	432 mm deep (17 in), 107 mm dia. (4.2 in), removable SST lid, special viewing channel for LIG sighting
Wetted Parts	304 Stainless Steel
Power	230 VAC (±10 %), 50/60 Hz, 10.7 A	230 VAC (±10 %), 50/60 Hz, 7.8 A
Volume	50 liters (13.2 gal.)	19.8 liters (5.2 gal., 43 kg [95 lb.] of bath salt)
Size (DxWxH)	572 x 762 x 1219 mm to working surface (22.5 x 30 x 48 in), 1422 mm (56 in) to top of stir motor box, 914 mm (36 in) to control panel	572 x 775 x 1219 mm to working surface (22.5 x 30.5 x 48 in), 1524 mm (60 in) to top of stir motor box, 914 mm (36 in) to control panel
Distance from Line of Sight to Top of Fluid	15.9 mm (5/8 in)
Automation Package	Interface-it software and RS-232 computer interface are included for setting bath temperature via remote computer. For IEEE-488, add the 2001-IEEE.