品牌/型号：福禄克FLUKE（96040A）库号：H1075108
福禄克FLUKE
型号:96040A
美国福禄克FLUKELowPhaseNoiseReferenceSource
The Fluke Calibration 96040A RF Reference Source enables you to simplify your RF calibration system by replacing many of the instruments and accessories that make up your current system. Its precision signal level and attenuation, high signal purity and precision low distortion modulation make this reference source superior to the general-purpose signal generators that are often used to calibrate spectrum analyzers, modulation meters, RF sensors, attenuators, and similar instruments. Its low phase noise provides superior phase noise performance.
Unlike many RF calibration solutions, the 96040A is designed specifically for RF calibration, with a calibration-oriented user interface that makes it easy to learn and use. The 96040A speeds up calibration procedures, reduces opportunities for operator errors, and greatly simplifies RF metrology. As the core of an RF and microwave calibration system, the 96040A covers the majority of test points required for calibrating spectrum analyzers of any frequency range.
Automated with MET/CAL® Plus Calibration Management Software, the 96040A reduces complexity and calibration times, dramatically improving efficiency and increasing capacity by 50 % or more over manual methods.
The 96040A calibrates a broad workload of RF calibration devices, including:
• Spectrum analyzers
• Modulation meters and analyzers
• RF power meters and sensors
• Frequency counters
• Attenuators
• And more
The metrology associated with calibrating these items becomes simpler because you have fewer error sources and uncertainty contributions to consider.
There are many applications in research and development, manufacturing test, and ATE needing better performance than a general purpose signal generator. If wide frequency coverage, frequency resolution, low harmonics, phase noise and spurious content, signal level and attenuation accuracy, or dynamic range are critical parameters the 96040A is an ideal solution.
As the central instrument in a high capability RF spectrum analyzer calibration system, the 96040A can cut your costs in half. The 96040A replaces all of these parts of a “typical” RF calibration system:
Up to four signal sources (from audio/ function generators to RF signal and low phase noise sources)
The 96040A not only reduces the initial need to purchase, install and configure RF system components, but it also reduces the maintenance and calibration costs associated with all of that equipment. The 96040A is also easier to transport than a heavy rack of equipment and accessories, making it a good solution for on-site calibration.
With its 4 GHz frequency range, the 96040A performs more than 80 % of all the tests required on high performance, high frequency spectrum analyzers.
For workload items that require frequencies beyond 4 GHz, you can use an RF and microwave source that you probably already own alongside the 96040A to address the few remaining higher frequency test points. For many spectrum analyzer models operating below 4 GHz, you only need a 96040A to perform the entire calibration. You can’t simplify much more than that!
The 9640A Reference Source’s internal modulation capability makes it suitable for applications that require precision modulation to be applied to the output signal, such as modulation analyzer calibration and spectrum analyzer sweep time testing using an AM signal with more accurate modulation rates. You don’t need additional function generators as a low frequency modulation source—the 96040A delivers it all.
The 96040A user interface is designed to simplify processes for calibrating typical items in your workload, such as spectrum analyzers, RF level meters and receivers. Parameter offset, stepping, relative and UUT/DUT error readout modes allow you to work accurately and eff
全球多地设有办事处
恒仪总部设在河北保定，北京、德国、美国、香港设有办事处，产品采购售后服务更方便。
全球1000多家供应商合作
恒仪与全球超过1000家工业品供应商密切合作，产品更全。
源头采购 价格更低
恒仪直接与全球各品牌厂家采购，省去中间商、代理商差价，价格更低、产品质量有保障。综合利润不超5
经验丰富 服务更好
我们的团队核心成员均来自行业知名企业，经验超过10年，为您提供更好的服务。
正品保障 更放心
每一件产品均全球各品牌原厂采购，保证100%正品、保证质量、保证售后。拒绝任何假货、次品货。
空运直发 货期更快
恒仪与国际知名物流公司合作，非限制产品，只发空运，货期更快。让客户更快拿到产品。
技术雄厚 售后保障
恒仪设有专业的技术及售后团队，为您解决各类产品使用问题，及时为您处理售后问题，服务有保障。
一站式服务 客户更轻松
恒仪采购全程一站式服务，让客户轻轻松松获得国际优质工业品，不再担心各类采购问题。
