品牌/型号：福禄克FLUKE（6531）库号：H1066466
福禄克FLUKE
型号:6531
美国E-DWTElectronicDeadweightTesterKits
Fluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include:
The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers.
The E-DWT-H is used in the lab or instrument shop or can be taken into the field for performing in-situ calibrations and tests. This hydraulic pressure calibration system combines a high performance electronic reference pressure monitor and manually operated pressure generation and control hardware in a single, compact and rugged package. E-DWT-H offers the ease of use and precision of continuous, real time electronic pressure measurement with the simple and direct pressure control of high quality manual pressure hardware. E-DWT is named “electronic deadweight tester” because it is intended as a lightweight and easy to use, modern alternative to conventional piston-cylinder and weight based deadweight testers.
The E-DWT’s electronic reference pressure monitor is a special version of RPM4, designated RPM4-E-DWT. RPM4-E-DWT can be configured with one or two high precision quartz reference pressure transducers (Q-RPTs) with ranges from 7 MPa (1 000 psi) to 200 MPa (30 000 psi).
The RPM4-E-DWT is controlled locally by the operator using its front panel display, keypad and optional foot pedal or remotely by a computer using ASCII character command strings over its RS-232 interface.
RPM4-E-DWT uses an AutoRange feature to automatically select the most appropriate Q-RPT and to optimize the E-DWT-H setup to cover the desired range of operation. When two Q-RPTs are included, a half-turn valve isolates and protects the Lo Q-RPT from high pressure when the Hi Q-RPT is in use. Visual and audible indicators assist the operator in setting the shut off valve correctly.
The E-DWT-H includes the hardware necessary to fill and prime the system under test and generate and precisely adjust pressure up to 200 MPa (30 000 psi).
The E-DWT-H can be powered with an optional battery/charger pack for use in locations where AC power is not readily available.
Fluke Calibration electronic deadweight tester kits feature E-DWT-H configurations combined with the accessories needed for a complete calibration system. Model 6531 options feature E-DWT-H configurations with a single quartz reference pressure transducer (Q-RPT) to offer percent of reading performance from 10 % to 100 % of device full scale. Model 6532 options feature an additional Q-RPT to maximize workload coverage, with percent of reading performance from 1 % to 100 % of device full scale. An included vacuum fill kit allows the E-DWT to be filled with your choice of compatible fluid, while eliminating problematic air pockets from the test circuit. Also included is a test station adapter to mount just about any pressure device to be tested without using PTFE tape or wrenches. 6531 and 6532 kits provide all you need to perform high level hydraulic pressure calibration right out of the box.
General |
|
| Power requirements | |
| To RPM4-E-DWT: | 12 V dc 1.2 A |
| To AC to DC power supply: | 100 V ac to 240 V ac, 50/60 Hz |
| Temperature range | |
| Storage: | - 20 °C to 70 °C |
| Operating: | 10 °C to 40 °C |
| Relative Humidity | |
| Storage: | 0 % to 100 % |
| Operating: | 0 % to 70 % |
| Weight | |
| 1 Q-RPT: | 12 kg (26 lb) approximate |
| 2 Q-RPT: | 14 kg (30 lb) approximate |
| Dimensions | |
| E-DWT footprint: | 41.4 cm W x 37.1 cm D (16.3 in x 14.6 in) |
| E-DWT height: | 26.9 cm (10.6 in), 33.6 cm (13.2 in) to max variable volume handle height |
| Pressure range | Up to 200 MPa (30k psi), depending on configuration |
| Operating medium | All 6531 and 6532 E-DWT Kits are shipped dry, standard preparation. Can be filled with di-ethyl-hexyl sebacate, silicon oils, propylene glycol, fully fluorinated liquids, partially fluorinated liquids, isopropyl alcohol and distilled water or mineral oil. |
| Reservoir capacity | 300 cc (18 in3) |
| Variable volume displacement | 3 cc (0.18 in3), 200 MPa (30,000 psi) maximum |
| Filling and priming pump displacement | 3.7 cc (0.23 in3) |
| TEST pressure connection | DH500 female, 200 MPa (30k psi) maximum working pressure. Adapters included for 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT, 1/8 in, 1/4 in, 3/8 in and 1/2 in BSP, M20 x 1.5 and M14 x 1.5. Adapter maximum working pressure is 140 MPa (20k psi). Note: DH500 is a gland and collar type fitting for 6 mm (1/4 in) coned and left hand threaded tubes equivalent to AE F250C, HIP HF4, 9/16-18 UNF, etc. |
| Pressure Limits | |
| Maximum Working Pressure: | Range of RPM4-E-DWT monitor’s Hi Q-RPT |
| Maximum priming pump pressure: | 700 kPa (100 psi) |
| Maximum Working Pressure: | with Lo Q-RPT selected: Range of RPM4-E-DWT monitor’s Lo Q-RPT |
| Communication ports: | RS-232 (COM1, COM2) |
Pressure measurement |
|
| Warm up time | 15 minute temperature stabilization recommended from cold power up |
| Normal Operating Temperature Range | 10 °C to 40 °C (50 °F to 104 °F) |
| Resolution |
Default: 0.01 % of active range User adjustable to 1 ppm of Q-RPT maximum or 10 ppm of active AutoRange, whichever is larger |
| Precision1 |
200 MPa (30,000 psi) ranges: ± 0.018 % of reading or 0.0036 % of Q-RPT span, whichever is greater All other ranges: ± 0.018 % of reading or 0.0018 % of Q-RPT span, whichever is greater |
| Predicted Stability2 | |
| One year: | ± 0.0075 % of reading |
| Two year: | ± 0.015 % of reading |
| Measurement Uncertainty3 | |
| One year: |
200 MPa (30,000 psi) ranges: ± 0.02 % of reading or 0.004 % of Q-RPT span, whichever is greater All other ranges: ± 0.02 % of reading or 0.002 % of Q-RPT span, whichever is greater |
| Two year: |
200 MPa (30,000 psi) ranges: ± 0.025 % of reading or 0.005 % of Q-RPT span, whichever is greater All other ranges: ± 0.025 % of reading or 0.0025 % of Q-RPT span, whichever is greater |
1. Combined linearity, hysteresis, and repeatability. Precision does not include stability or calibration reference uncertainty.
2. Predicted Q-RPT measurement stability limit (k=2) assuming regular use of AutoZero function and short term stability between rezeroing.
3. Maximum deviation of the Q-RPT indication from the true value of applied pressure including precision, predicted stability with rezeroing, temperature effect from 10 ºC to 40 ºC and calibration uncertainty (assumes calibration reference uncertainty of ±0.005 % of reading, k=2), combined and expanded (k=2) following the ISO “Guide to the Expression of Uncertainty in Measurement.
| 型号 | 描述 |
|---|---|
| 6531-7M |
E-DWT-H A7M, 0.7 to 7 MPa, 100 to 1,000 psi Includes: |
| 6531-14M |
E-DWT-H A14M, 1.4 to 14 MPa, 200 to 2,000 psi Includes: |
| 6531-20M |
E-DWT-H A20M, 2 to 20 MPa, 300 to 3,000 psi Includes: |
| 6531-40M |
E-DWT-H A40M, 4 to 40 MPa, 600 to 6,000 psi Includes: |
| 6531-70M |
E-DWT-H A70M, 7 to 70 MPa, 1,000 to 10,000 psi Includes: |
| 6531-140M |
E-DWT-H A140M, 14 to 140 MPa, 2,000 to 20,000 psi Includes: |
| 6531-200M-B |
E-DWT-H A200M, 20 to 200 MPa, 6,000 to 30,000 psi Includes: |
| 6532-70M |
E-DWT-H A70M/A7M, 0.7 to 70 MPa, 100 to 10,000 psi Includes: |
| 6532-140M |
E-DWT-H A140M/A14M, 1.4 to 140 MPa, 200 to 20,000 psi Includes: |
| 6532-200M-B |
E-DWT-H A200M/A20M, 4 to 200 MPa, 600 to 30,000 psi Includes: |
| 配件 | 描述 |
|---|---|
| Case |
加固且可重复使用的模制装运外壳（部件号 3338097） |
| Case |
加固、轮式且可重复使用的模制装运外壳（部件号 3329777） |
| 电池组/充电器 |
带有充电器的 12 VDC 电池（部件号 3071049） |
| 脚踏开关 |
远程 [ENTER] 脚踏开关（部件号 3070940） |
| 互连套件 |
E-DWT 后测试端口，连接测试设备（部件号 3466377） |
| E-DWT 液体填充套件 |
用于加注耗干的 E-DWT，或重新加注有空气进入的 E-DWT（部件号 3462475） |
| BSP 适配器套件 |
1/8、1/4、3/8、1/2 BSP 适配器（部件号 3466419） |
| NPT 适配器套件 |
1/8, 1/4, 1/2NPTF 适配器（部件号 3466392） |
| COMPASS for Pressure |
自动执行测试、数据采集、报告与设备资产管理的软件 |
全球多地设有办事处
恒仪总部设在河北保定，北京、德国、美国、香港设有办事处，产品采购售后服务更方便。
全球1000多家供应商合作
恒仪与全球超过1000家工业品供应商密切合作，产品更全。
源头采购 价格更低
恒仪直接与全球各品牌厂家采购，省去中间商、代理商差价，价格更低、产品质量有保障。综合利润不超5
经验丰富 服务更好
我们的团队核心成员均来自行业知名企业，经验超过10年，为您提供更好的服务。
正品保障 更放心
每一件产品均全球各品牌原厂采购，保证100%正品、保证质量、保证售后。拒绝任何假货、次品货。
空运直发 货期更快
恒仪与国际知名物流公司合作，非限制产品，只发空运，货期更快。让客户更快拿到产品。
技术雄厚 售后保障
恒仪设有专业的技术及售后团队，为您解决各类产品使用问题，及时为您处理售后问题，服务有保障。
一站式服务 客户更轻松
恒仪采购全程一站式服务，让客户轻轻松松获得国际优质工业品，不再担心各类采购问题。
